60W ETFE solar charger Quick charge function

1. Highest efficiency

The transformation efficiency of our mono folding solar panel is up to 20%,  Germany monocrystalline folding solar panel is up to 22%,while most of the similar products on the market is 15% or even lower;

2. ETFE surface keeps the solar blanket better performance and long lifetime

Imported from Japan, the ETFE has a better transparency than the normal PET so that keeps the solar blanket higher output in the same light condition. The ETFE also keep the solar blanket more than 8 years life time

3. Unique design-Equipped with Voltage Regulator to ensure stability

The only minus of free sunlight is not stable, solar panel powered by unstable sunlight leads to unstable current and voltage, which will shorten your device’s life or even damage it. Our solar panel’s voltage regulator keeps your device getting stable current and prolongs its life.

4. Our folding solar panel with Automatically recognized-USB IC built in to ensure charge all kinds of cell phone and highest efficiency to finish charging

The common folding solar panel with USB connector cannot charge some kinds of cell phones, due to without automatically recognized-USB IC. It was always shown “not supported the accessory” when connected. Besides, the special IC used can make the charging current input as big as possible, so as soon as possible charging finished. While the other kinds of folding solar panel on the market only can eat some of the output current, so the charging time is much longer.

5. Quick Charge function

There is two USB output and one Type-C output. The USB output support the Qualcomm QC2.0 and QC3.0, Huawei FCP and SCP, maximum 25W quick charge. The Type-C output support USB-PD 5V/3.4A, 9V3A，12V/3A,15V/2.3A, 20V2.3A，suitable for Apple, Sumsung, MKT PE, Huawei FCP and SCP, maximum 45W quick charge

Warning and Safety Instructions

1. Risk of explosive gases: Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal operation. For this reason, it is of utmost importance that you follow the instructions each time you use the solar panel charger

2. Solar panel charger should not be used by persons with reduced physical, sensory or mental capabilities unless they are supervised by a person responsible for their safety

3. Do not charge the non-rechargeable batteries by the solar panel charger. It can damage the regulator or solar panel charger or harm to operator. Only use the solar panel charger DC18V for charging standard lead-acid, lithium-polymer, Li-Fe, Gel and AGM type 12V batteries and USB5V to charge mobile phone, digital camera, ipad and other 5V devices

4. Never smoke or allow a spark or flame in vicinity of battery or engine. This may cause the battery to explode.

Product Specification:

How to charge your device

1. Unfold the solar panels and spread them to direct sunlight.

2. USB 5V output: connect your 5V device to the USB port of the solar panel charger with your original cable

3. Type-C output: connect your device who has the QC function, it will detect the QC model and charge your device

4. DC18V output: connect the Anderson connector with solar charger controller and then connect the clips with the batteries.

5. Place the connected device in the solar panel’s inside pocket, or keep it out of the sunlight as direct sunlight and over-heat may damage the device.